topMenuBar
topMenuBar

Offshore Metocean Monitoring Systems and Support Services

Woods Hole Group provides a broad range of real-time metocean monitoring systems for the offshore environment. Such systems are typically required for real-time operational monitoring of key parameters that can impact the safety, security and feasibility of offshore activities and to provide a basis for the assessment of fatigue on key offshore assets and facilities. Such systems are often purchased by Clients as the most cost-effective basis for undertaking long-term, real-time monitoring and day to day operational guidance, however, Woods Hole Group can also provide leased solutions.

The Real-time Metocean Monitoring (RTMM) systems typically fall into the following categories:

  • Fixed Systems For offshore fixed platforms and floating facilities including semisubmersibles, spars, TLPs, FPSOs, FSOs, CALM buoys/SPMs and other facilities and vessels.
  • Mobile Drilling Unit (MoDU) real-time current monitoring systems for drillships and semisubmersible rigs.
  • Buoy Systems The Woods Hole Group WatchDog buoy-based, real-time metocean monitoring systems.

Woods Hole Group metocean monitoring systems are designed by experienced oceanographic engineers, oceanographers and technicians. We focus on providing systems that deliver reliable, high quality, real-time data that will support day to day operational planning for a marine facility. The systems are engineered to allow ease of operation by Client personnel and to minimize regular maintenance requirements. Our metocean monitoring systems and support services include the following:

  • Client support for system evaluation and scope of work development.
  • Choice of sensors that will provide the required data accuracy and meet the demands of the marine environment and the installation environment.

Detailed system design including:

  • Identification for sensor locations.
  • Instrument Launch and Recovery Systems (LARS).
  • Sensor housings and mountings.
  • System cabling requirements.
  • System power and communications requirements.
  • On board real-time data displays.
  • Secure, web-based data displays.
  • Real-time data quality control.
  • Data management and archiving.
  • System integration including purchase of the sensors and components, software and firmware development and compilation of the whole system.
  • System Factory Acceptance Testing (FAT) of the full system capability, with direct Client involvement, if required.
  • System packing and transportation logistics to the Client.
  • System installation and commissioning ranging from buoy-based RTMM deployment, to working on the Client facility with Client engineers and contractors to fully install and commission the system.
  • Site Acceptance Testing (SAT) of the full system capability.
  • System health and operability monitoring by Woods Hole Group oceanographic engineers and oceanographers.
  • Routine system maintenance services recommended for ongoing reliable operation, including the replacement of key components as needed.
  • Emergency system maintenance services in the event of system damage due to unforeseen circumstances.
  • Data management, maintaining an archive of the system measurements, providing regular data QA/QC and the preparation of system data reports on a regular or as needed basis.

Contact Woods Hole Group for your offshore real-time metocean monitoring system needs.





















2013 Interview with Bruce Magnell

Interview with Bruce Magnell


Chaos Is The Rule At Depth